|
You Get ALL
|
this STUFF !!
|
|---|
Frame Pre-cut & Notched
|
_ 2 - 55 in. main rails
_ 1 - 35 in. front axle notched
_ 1 - 25 in. front center rail
_ 1 - 15 in. rear center rail
_ 1 - 41 in. rear axle
_ 1 - 35 in. rear bumper
_ 2 - 13 in. outer mount
_ 2 - 30 in. crossbars
_ 1 - 3 1/4 front mount tube
|
|---|
3/4 round Pre-cut & Bent
|
_ 1 - formed steering upright
_ 1 - 27 in. steering shaft
_ 1 - formed 2 pc steering wheel
|
|---|
Rods/Pedals Pre-cut & Formed
|
_ 2 - formed pedals (gas & brake)
_ 1 - formed brake rod
_ 1 - formed throttle rod
_ 1 - 5/16 x 10 1/2 in. tie rods
_ 1 - 5/16 x 25 1/2 in. tie rods
|
|---|
Frame Weldments
|
_ 4 - 5/8 in. axle shafts
_ 3 - 1 x 3/4 x 1 1/8 in. sleeves
_ 5 - 3 hole x 3 3/4 in. tabs
_ 2 - Cradles 1/2 die formed
_ 7 - pan tabs 5/16 in. hole
_ 2 - spindle tubes
_ 5 - 5/16 x 1/2 in. clevis pins
_ 2 - pedal mount tubes
_ 1 - motor mount plate
|
|---|
Floor Pans
|
_ 2 - 26 x 15 1/4 in. steel floorpan
|
|---|
2 Seater Hardware Kit
|
_ 8 - 1/4 x 3/4 bolts
_ 8 - 1/4 lock nuts
_ 1 - 10-24 x 1 1/4 bolt
_ 1 - 10-24 nut
_ 7 - cotter pins
_ 14 - 1/4 sae washers
_ 8 - fender washers
_ 2 - kingpin bolts
_ 2 - kingpin nuts
_ 4 - 5/8 axle nuts
_ 1 - throttle return spring
_ 2 - MXK stickers
|
|---|
2 Seater Brake Kit
|
_ 1 - 4 inch band
_ 1 - 4 inch drum
_ 1 - anchor pin
_ 1 - linkage guide pin
|
|---|
2 Seater Plans & Assembly Instructions
|
_ 25 page fully illustrated plans
and assembly instructions
|
|---|
This FRAME kit is NOT WELDED.
To finish your kart you will need to add:
Seats - Wheels & Tires - Engine
Rollbar is Optional
|
Twice the Fun !!
ORDER NOW !!
|
|---|
|
|---|
